Plastic nose and white shaft
All noses have white plastic washers
Suitable for toys providing suitable fabric
is used and they are fitted correctly
Comply with the relevant sections of EN-71 which can be
downloaded via the Info Link at the top of all main pages
Noses are not available without washers, washers are not
available without noses and we do not have any spares of either
All measurements below are approximate and in millimetres.
Width and Height are are measured across the back of the nose
| 12mm | 15mm | 18mm | 21mm | 24mm | |
|---|---|---|---|---|---|
| Width | 12 | 15 | 18 | 21 | 24 |
| Height | 9 | 11 | 13 | 16 | 18 |
| Depth | 3 | 5 | 6 | 7 | 7 |
| Shaft Length |
12 | 12 | 12 | 12 | 14 |
| Shaft Dia. |
5 | 5 | 5 | 6 | 6 |
| Washer Dia. |
14 | 14 | 17 | 17 | 17 |
HOW TO USE
Push shaft through fabric - you may need to make a small hole
Place plastic washer on shaft with flat side towards nose
Place a hollow tube or pipe on top of washer
Knock the washer down the spindle
You can push with your thumbs but make sure you do it evenly
Do not jiggle the washer once fitted as
that will effect the safety of the nose
Make sure the washer is right next to the
nose as that may effect the safety of the nose
Please note - washer cannot be removed once fitted
USES
Children's Toys
Let us know if you use them for other things